Removing the cover on the BrewPi Spark

[brianpedersen]

This may sound like a silly question, but what is the trick for removing that black plastic cover?

There seem to be four small tabs holding it in place, two on the top and two on the bottom, but there doesn’t seem to be any play in them.

Should the tabs be pushed in, should the cover be pulled out, or … ?

[Dan]

Opening BrewPi Spark Case

Here is how to open the case: Gfycat Opening the BrewPi Spark case Next step is a bit harder: to get the board off the bottom plate, you will have to pinch the hook of the standoffs while lifting the board. It that is not working for you, you can unscrew the standoffs from the bottom plate instead, while they are still hooked into the board by grabbing them with pliers. [image]

[brianpedersen]

Thank’s. I tried something like that, but was afraid to break it