Setting system to Idle

I was thinking I may have asked this before but a search of my posts didn’t find anything. I want to set my fermentation fridge to an Idle or off state. I haven’t been brewing as much due to the pandemic so what is the easiest way to set the controller to a no heat no cool state ?? Is there a idle or off toggle to “idle” temperature control ??

Sorry if I asked this before but I could not find it.

If you disable the setpoint profile and setpoint, it will also disable control for the PID using the setpoint.

If you also don’t care about tracking temperature, you can disconnect the Spark, and run brewblox-ctl down on the Pi. This will turn off the system entirely.